Noise Reducer
Add one MP3 or WAV file, listen to it, keep the automatic mode or choose the kind of noise to remove and how strongly, then press "Reduce noise". The cleaned audio plays in the result so you can compare it with the original before downloading.
About this tool
Voice memos, interviews, lectures and podcast takes recorded with a laptop or a phone pick up noise that makes them tiring to hear: the hiss of the microphone, the hum of a power line, the rumble of traffic or an air conditioner. Noise Reducer cleans the recording with the professional audio filters of FFmpeg, running in your browser. The automatic mode listens to the recording, builds a profile of the steady noise and subtracts it from the whole file, which handles hiss, fans and air conditioning; the targeted modes use the right filter for a known problem: a notch comb for the 50/60 Hz hum and its harmonics, a steep high-pass for rumble, and a non-local means denoiser for complex, non-constant noise. The strength slider goes from a light touch to aggressive; too high and voices start to sound hollow, so start in the middle and listen. MP3 files come back as MP3 (192 kbps), WAV files as WAV.
Related: Audio Volume Boost, Audio Cutter, Audio to MP3, Audio Extractor.
How to use it — quick steps
- 01
Add the recording
Drop or choose one MP3 or WAV file, up to 50 MB, and listen to it in the preview.
- 02
Choose mode and strength
Keep "Automatic" or pick the kind of noise; set the strength from 1 to 10 (5 is a good start).
- 03
Press "Reduce noise"
The cleaned file plays in the result; compare it with the original and download it.
Key features of this tool
Automatic or targeted
Let the tool profile and remove the steady noise, or pick hiss, electrical hum, rumble or complex noise for a filter made for that problem.
Adjustable strength
From 1 to 10: light settings keep the voice natural, strong ones remove more but can thin the sound; preview and adjust.
Nothing leaves your browser
The selected audio file is cleaned in your browser with FFmpeg, it never leaves your device and is not uploaded on our servers.
Frequently asked questions
Which mode should I choose?
Automatic for most recordings. Choose "Electrical hum" for a constant low buzz, "Low-frequency rumble" for traffic, wind or handling noise, "Background hiss" for the static of a cheap microphone, and "Complex noise" when the noise changes over time, such as a crowd or rain.
The voice sounds robotic or underwater
The strength is too high for that recording: lower it a notch or two. Noise reduction always trades a little naturalness for cleanliness.
Does it remove other voices or music?
No; it removes steady or well-defined noise. A second speaker or background music cannot be separated by a filter.
Which formats are accepted?
MP3 and WAV, up to 50 MB. Convert other formats with Audio to MP3 first.
Are my files or data uploaded?
No. The tool is plain JavaScript that runs in your browser; the files or data you provide here are never uploaded to our servers.